I am trying to set up an NW4.11 server to run purely with IP. I have configured the IP protocol via Inetcfg and it works fine as I can ping the server. The problem is I cannot log into from my clients. If I add IPX then everything is fine. Why can I not communicate with the server through IP? The server also runs DHCP and is assigning addresses to clients fine.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Novell 4.11 in pure IP environment
- Thread starter trevorh13
- Start date
TheBoySmith
Technical User
You can not have a 4.11 server running in pure IP. It will only run Netware IP which is not pure IP.
The easy answer. You can not do it.
The IP ping works but the netware will not communicate over IP. Netware IP is encapsualted ipx. Lee Smith
Xenon Network Services
Snr. Technical Support
LSmith@xenon-uk.co.uk
The easy answer. You can not do it.
The IP ping works but the netware will not communicate over IP. Netware IP is encapsualted ipx. Lee Smith
Xenon Network Services
Snr. Technical Support
LSmith@xenon-uk.co.uk
FredWagner
MIS
To be more positive, Netware 5.x WILL run in pure IP environment, or in mixed IPX/IP. Upgrade to 5.x and you're all set for pure IP if that's what you need. Recommend having IPX as an option tho, so you can use it if you need it.
Fred Wagner
frwagne@ci.long-beach.ca.us
Fred Wagner
frwagne@ci.long-beach.ca.us
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question