Novell 4.11 and onboard NIC 1

[FairbanksF]

I am trying to install Novell 4.11 on an Intel 810 motherboard with a built on NIC. When it comes time to install the network drivers it prompts me for a slot. Is there a work around on this? I've downloaded the latest drivers, but that didn't work. And I've tried to bypass assigning it a slot but it won't let me. Any ideas? Thanks...

 

[yvfwc]

Your slot is probably in the range 10001 - 10005.

Good Luck,
Mark ;-)

 

[thickage]

Some of the Dell computers assign slot 17 as the integrated NIC slot.

 

[O1]

Also if you put the wrong slot in it will come up asking for the slot and if it has found the card it will tell you ythe slot number. And then all you have to do is add the slot number to the line in the AUTOEXEC.NCF

C YA
O1

 

[FairbanksF]

10001 worked! Thanks a lot.