Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

nothing on monitor after boot

Status
Not open for further replies.

loadedian

Technical User
Jan 12, 2003
1
AU
Hi guys,

I have a gigabyte ga-7dxe and i am running a sparkle geforce ti2000 128mb ddr video card.
I am running windows xp after installing drivers i reboot and i see the windows professional screen then nothing the whole screen goes blank??
the card has its own irq...
i have tried every update driver etc and to no avail..
any ideas would be much appreciated
 
Did you load the motherboard chipset drivers before loading the video drivers? (that's usually the mfr. prescribed routine)
Move the jumper to flush the BIOS (with the system powered down and unplugged)...this should let you boot using the VGA display (and restore default settings in the BIOS). The jumper is usually near the battery and your motherboard manual will help you find it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top