Not Ringing on 2616 sets

[Davidfrank]

I have 30 sets programmed as scr, all with the same main line. Only 3 of the sets ring. All the others flash even though they're programmed as scr. It doesn't appear to be a programmimg issue.

 

[wolfi24]

Try , with MCR .


Wolfi

 

[acewarlock]

to make them MCR you will have to out all the SCR keys first, are you sure there all SCR and not SCN?

 

[Davidfrank]

They're all scr. Is there a limit to how many phones with the same ext the PBX can ring?

 

[acewarlock]

Have you tried the non-ringing phones in the jack of a phone that rings to see if it's a phone problem or a port problem.

 

[PERRYPJ]

IF I REMEMBER RIGHT THE LIMIT IS AROUND 25 OR SO FOR MCR, BUT IT WONT IF LET YOU PUT THEM ON AFTER YOU REACH THE LIMIT

OLD ROLMEN WORKING ON NORTELS

 

[Davidfrank]

These sets that are not ringing have an AOM with many line app. All of those lines ring if programmed SCR, but this main line which appears on all 30 sets will only ring on 3 phones. I have moved to different ports, swapped digital cards. The same 3 phones ring and the other don't.

 

[coniglio]

did you check the volume using the PROGRAM key? press PROGRAM, then 00 then you have 4 choices. maybe the ringing parameter is too low.

 

[acewarlock]

You say it rings on the AOM's but not the main phone?

 

[Davidfrank]

All the other lines ring fine.

 

[acewarlock]

Could you prt the TNB of one phone that works and one that doesn't work so we can see it.