Guest_imported
New member
- Jan 1, 1970
- 0
how can i force an agen from not ready from the supervisor terminal
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
not ready status
- Thread starter Guest_imported
- Start date
- Status
- Thread starter
- #2
If you use standard Meridian 1 ACD you can not use the supervisor terminal to force the agent in Not Ready mode. If <you use a symposium call centre you can set up call presentation to do the following: if the phone rings for 10 secs you automatic return the call to the queue and you can put the set on not ready.
You can log out the set via the disable enable command in LD 32. But then you need addtional to the SPV Terminal a systrem accsess.
You can log out the set via the disable enable command in LD 32. But then you need addtional to the SPV Terminal a systrem accsess.
- Status
Similar threads
- Locked
- Question
- Locked
- Question