Not passing 011 on the D Channel on a CS1000

[Don6531]

I have two trunk groups 1 Global Crossing set up 5EES and 1 ATT set up D100. When sending call to the GX trunk group here is what I get.
DCH 7 OMSG SETUP REF 00000008 CH 86 8 TOD 10:11:03
CALLING #:4147653535 NUM PLAN: E163/NATIONAL (UNKNOWN)
CALLED #:442076678426 NUM PLAN: E163/INTERNATIONAL (UNKNOWN)
DCH 7 IMSG CALLPROC REF 00000008 CH 86 8 TOD 10:11:03

DCH 7 IMSG PROGRESS REF 00000008 CH 86 8 TOD 10:11:03
PROGRESS: INBAND INFO OR PATTERN IS AVAIL

DCH 7 IMSG DISC REF 00000008 CH 86 8 TOD 10:11:03
CAUSE :UNASSIGNED NUMBER

When sending the call to ATT here is what I get
DCH 1 OMSG SETUP REF 00000032 CH 45 2 TOD 11:25:18
CALLING #:0114147653535 NUM PLAN: E164/INTERNATIONAL (UNKNOWN)
CALLED #:011442076678426NUM PLAN: E164/INTERNATIONAL (UNKNOWN)

DCH 1 IMSG STATUS REF 00000032 CH 45 2 TOD 11:25:18
CAUSE :USER INFO DISCARDED
STATE : CALL INIT ST

DCH 1 IMSG CALLPROC REF 00000032 CH 45 2 TOD 11:25:18

DCH 1 IMSG DISC REF 00009B56 CH 34 7 TOD 11:25:18
CAUSE :NORMAL CALL CLEARING

DCH 1 OMSG RELEASE REF 00009B56 CH 34 7 TOD 11:25:18

DCH 1 IMSG REL COMP REF 00009B56 CH 34 7 TOD 11:25:18



DCH 7 OMSG RELEASE REF 00000008 CH 86 8 TOD 10:11:03

DCH 7 IMSG REL COMP REF 00000008 CH 86 8 TOD 10:11:03

DCH 7 OMSG DISC REF 0000000A CH 86 10 TOD 10:11:13
CAUSE :NORMAL CALL CLEARING

This works. Any ides were the 011 on the Global Crossing d channel is going?

 

[GHTROUT]

Don, two places I'd experiment with include:

~ The SPN - toggle the INPL (I know, it worked on the old span, so why is there a need to change it - can't answer that)

~ Look in the NET_DATA CLID - INTL 0-9999 Country code (1-4 digits)

I had someone change carriers and for whatever reason, they said when I set the INTL value, they started seeing the 011. I am not certain if it was a story or not.

--
Nortel Resources at GHTROUT.com
--

 

[Don6531]

I have toggle the INPL and the INTL is set to 011. Do you think it can be how the carrier has the D Channel set up?

 

[GHTROUT]

On the system I had the issue, I set the INTL to 1 if I remember right. The INTL is for your own system as far as I know. It is all sort of mysterious

I do not *think* it is the carrier. As you know, it worked before. Did you re-allocate spans? I had GX as first choice for all International back in the day.


--
Nortel Resources at GHTROUT.com
--

 

[Don6531]

I replaced the two DTI trunk groups Spring & Global Crossing with PRI's. The AT&T trunk group works.

 

[GHTROUT]

Ya, I remembered they were old DTIs after I posted. Verizon still there and working for International?

I would say make everyone emulate D100 if it gets to time consuming

--
Nortel Resources at GHTROUT.com
--