Not getting AUD000 or DTC000 messages

[JTHorn]

I noticed today I am not getting the AUD000 or the DTC000 message since yesterday afternoon. I looked back on the log and did not see any message that would say they stopped.
Can anyone tell me what I need to check?

 

[mikeyb123]

what's your TTY set to?

look at the USER prompt.

REQ prt
TYPE adan tty 5

ADAN TTY 5
CTYP QSDI
GRP 0
DNUM 5
DES maint
FLOW NO
USER MTC SCH
XSM NO
TTYLOG 0
BANR YES



It's not getting any smarter out there. You have to come to terms with stupidity, and make it work for you.

 

[JTHorn]

TTY 5 is not the same kind that you show. The one that looks close the ctyp you show is:

ADAN TTY 1
CTYP QSDI
GRP 0
DNUM 1
DES MAINT
FLOW NO
USER MTC SCH BUG
XSM NO
TTYLOG 0
BANR YES

 

[johnpoole]

might just need to dis tty 1, ld 37 then enl tty 1, don't do that from tty 1..may come back with an ini.. i would go to another term, do the dis tty enl tty the just type tty 1 in load 37 and that will send a msg to tty 1

john poole
bellsouth business
columbia,sc

 

[janchundia]

ld 22
req prt
type parm
*
*
*
*
errm err bug aud
*
*



Check if you have this setting in your system.

Regards

javier

 

[JTHorn]

It did have the ERRM you mentioned.
About a week ago, the "aud000" and "dtc000" messages started appearing again.