Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Not able to varyonvg
- Thread starter neekar
- Start date
For the VG you are trying to varyon - are they all local disks? If so, whomever has physical access to the box should check for failed disks.
If the disks are SAN, have your SAN person check to see if there are any failed disks on that end and/or make sure the disk hasnt been re-allocated elsewhere (seen this happen a few times).
Add a little color to your PUTTY terminal: faq52-6627
If the disks are SAN, have your SAN person check to see if there are any failed disks on that end and/or make sure the disk hasnt been re-allocated elsewhere (seen this happen a few times).
Add a little color to your PUTTY terminal: faq52-6627
Are you sure that all the disks are in Available state?
If so, have you tried force varyon? (varyonvg -f vgname)?
Could be that you lost quruom (although the error message would be different!)
Regards,
Khalid
If so, have you tried force varyon? (varyonvg -f vgname)?
Could be that you lost quruom (although the error message would be different!)
Regards,
Khalid
- Status
Similar threads
- Question