Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Not able to open PBX tab, other tabs working find

Status
Not open for further replies.

ram41

Technical User
Oct 6, 2014
8
US
Hi

My Environment: freePBX-2.8.1-18, elastix-2.4.0-8
When I try to open PBX tab blank page coming, all other tabs are working fine.
I am getting FATAL ERROR when I access with following error
"
Array
(
[0] => Array
(
[file] => /var/ [line] => 69
[function] => die_freepbx
[args] => Array
(
[0] => DB Error: connect failed
"

In the SSL_ERROR.log file I found following info.
[Fri Nov 28 21:12:38 2014] [error] [client 96.56.82.259] PHP Fatal error: Call to undefined method DB_Error::escapeSimple() in /var/ on line 1310, referer: [Fri Nov 28 21:19:50 2014] [error] [client 96.56.82.259] PHP Fatal error: Call to undefined method DB_Error::escapeSimple() in /var/ on line 1310, referer: [Fri Nov 28 21:47:27 2014] [error] [client 96.56.82.259] PHP Fatal error: Call to undefined method DB_Error::escapeSimple() in /var/ on line 1310, referer: [Fri Nov 28 21:47:36 2014] [error] [client 96.56.82.259] PHP Fatal error: Call to undefined method DB_Error::escapeSimple() in /var/ on line 1310, referer: [Fri Nov 28 21:47:50 2014] [error] [client 96.56.82.259] PHP Fatal error: Call to undefined method DB_Error::escapeSimple() in /var/ on line 1310
[Fri Nov 28 21:48:15 2014] [error] [client 96.56.82.259] Fri, 28 Nov 2014 21:48:15 -0500 - Got event.. fullybooted, referer: [Fri Nov 28 21:48:15 2014] [error] [client 96.56.82.259] Fri, 28 Nov 2014 21:48:15 -0500 - No event handler for event 'fullybooted', referer:
Please help me to fix this issue.

Thanks
RAM
 
Did you upgrade anything on the FreePBX side? I have found that if you upgrade FreePBX modules this sometimes does not sit well with Elastix.

Bottom line you are better off using the Elastix GUI or just install FreePBX.

Clowns to the left of me, jokers to the right, here I am, stuck in the middle with you.
 
I found if you change the ip address from IP to Static and fail to provide for loop back this can happen

set it as follows obviously change ip to suit

in /etc/network/interfaces

auto lo
auto eth0
iface lo inet loopback #(this is the line)
iface eth0 inet static

address 10.253.253.253
netmask 255.255.255.0
network 10.253.253.0
broadcast 10.253.253.255
gateway 10.253.253.1

This may cure it

Ken
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top