I was using WS_FTP LE to upload files to my website hosted at xyz. The web host put a spam filter on my site, and since then I have been unable to upload. At my request he removed the filter, but I am still unable to connect. I tried using another ftp program (CoffeeCup), but that did not do it. Error: 500 ESocketException: Error 10050 in function connect. Network is down. Any help would be appreciated. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Not able to FTP
- Thread starter bobbys9
- Start date
Maybe you installed (or are behind) a firewall that have closed port 21?
What is the error?
Try it from the prompt:
Run->ftp (hit ENTER) and type this
[tt]open xyz.com[/tt] (if that's the ftp serner name)
It should then ask for your login and password...
Good Luck §;O)
Jakob
What is the error?
Try it from the prompt:
Run->ftp (hit ENTER) and type this
[tt]open xyz.com[/tt] (if that's the ftp serner name)
It should then ask for your login and password...
Good Luck §;O)
Jakob
mattjurado
MIS
If you have no firewall blocking the port, then the problem is likely with your web host. Tell them you still cannot ftp, and you have tried multiple ftp clients.
Matt J.
Matt J.
TekTippy4U
Technical User
Could it be u need Winsock 2.0 or better..?
TT4U
Notification:
These are just "my" thoughts....and should be carefully measured against other opinions....I try very hard to impart correct info at all times.
TT4U
Notification:
These are just "my" thoughts....and should be carefully measured against other opinions....I try very hard to impart correct info at all times.
- Status