Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Not able to block system disk

Status
Not open for further replies.

runlun

IS-IT--Management
Dec 12, 2006
106
NO
Hi

I planned to swap the disk (flashcard)as a part of periodic maintenance, but I am not able to block the equ (1-0-60-0)

I hav tried restart of card, but the same happens:

Cannot block the equ because it is busy..

Can anyone help me? Printouts below (TSW sp 8)

<bleqi:equ=1-0-60-0;
ORDERED

<ioddp;
I/O DEVICE DATA
NODE IODEV/SUBFS BPOS/EQU I/O-BUS TYPE/USAGE STATUS AUTH
SYSN - 001-0-60 - - IN SERVICE
SYSN SYSDISK1 001-0-60-0 MASTER teac BLOCKING REQ
SYSSUBFS11
SYSSUBFS21
SYSN SYSTERMINAL 001-0-60-1 - MML - 7
SYSN PC-OG-MODEM 001-0-60-2 - MML - 7
SYSN GICI 001-0-60-4 - NETWORK/OUT IN SERVICE
SYSN MML1 001-0-60-4 - NETWORK/MML - 7
SYSN MML2 001-0-60-4 - NETWORK/MML - 7
SYSN MML6 001-0-60-4 - NETWORK/MML - 7
SYSN2 - 002-1-70 - - IN SERVICE
SYSN2 CSTA1 002-1-70-4 - NETWORK/OUT IN SERVICE
SYSN2 MML3 002-1-70-4 - NETWORK/MML - 7
SYSN2 MML4 002-1-70-4 - NETWORK/MML - 7
SYSN2 MML5 002-1-70-4 - NETWORK/MML - 7
END



SPONTANEOUS PRINTOUT

BLOCKING EQUIPMENT POSITION INITIATE
BUSY EQU
1-0-60-00
END
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top