Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Not a DATA-GRADE tape
- Thread starter Bassment
- Start date
I ran into a similar problem a few years ago when I upgraded my tape drive from a QIC to a DAT Autoloader(Compaq). The drive didn't like the brand of DDS tapes I was using and I got an error message from ARCserve(5.01).
I found a switch setting in the drive documentation that set Media Recognition ON/OFF and set it to off, that fixed the problem. The drive documentation recomended a different brand of tape and the Media Recognition was very particular?
Anyway, the drives and tapes work great and I'm now on my second set of drives and expanded library of tapes running on ARCserve 6.6.
HTH
Ken
I found a switch setting in the drive documentation that set Media Recognition ON/OFF and set it to off, that fixed the problem. The drive documentation recomended a different brand of tape and the Media Recognition was very particular?
Anyway, the drives and tapes work great and I'm now on my second set of drives and expanded library of tapes running on ARCserve 6.6.
HTH
Ken
- Status