Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nostar Backup

Status
Not open for further replies.

bostech

Vendor
Feb 2, 2004
144
US
Hello Everyone,

Can you backup an MICS 1.1, upgrade the software to 4.1 or above, and restore the programming?

Thanks
 
nope only can restore to same release...if you need to go back you can restore to old release

Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.

 
An awkward but effective way is to print configuration of R1T1 with N* Manager, then transfer info by PC/hand to a 4.1 excel work book, then upload. This will allow you to make a large programming change with a short down time.

PhM

 
For an upgrade to 4.1 you need to go to 3 first. That in-between step, will get you the ability to do a backup with NRU.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top