Nortell 86XX SW 4.1.8.3 SSH and SSL issue

[CCWorks]

I have multiple itn's running the same setup and none can be accessed by ssh, i type user name in and it kicks back a block that says you need ssh server enabled or check user name and password. SSH is enabled and i use the same user name as CLI but got no joy. I've checked everything i can think of but still no joy. can anyone give me some insight? on the SSL issue, i cant find anything that tells how to set up ssl. I can see the read only webpage but it is not ssl, any thoughts?

 

[andy88]

You will need the 3DES image file loaded on the /flash.

p80cxxxx.img

Then the following commands

#config load-encryption-module 3des
#config boot flags sshd true
#config sys set ssh enable secure
#save config
#save boot

 

[CCWorks]

all is done but config sys set ssh enable secure. if i do that doesnt that kill snmp?

 

[andy88]

ssh secure will disable snmp. if you want snmp you don't need to use the command.

the web management interface doesn't support ssl.

 

[CCWorks]

Thanks for the info, so you cant use ssh if you use snmp v3. thats goofy, but o.k. you saved me beeting my head against the wall!