Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel81c

Status
Not open for further replies.
dhananjayak

dhananjayak

Technical User
Feb 22, 2006
50
DE
BSD206 68:68 72 73 74 75 76 77 82 83 84 85 86 87 88 89 90 91 92 94 95

The above error is flashing but we are able to make calls to loop 68. the other loops are PRI/DTI loops
 
Sort by date Sort by votes
BSD0208 loop: ts
The software network map indicates that timeslot s of loop L is idle but network
memory word for that slot is not idle. The indicated slot is marked busy in the
software map and the current continuity test of loop L is abandoned.
A possible software fault may exist which is similar to the type referred to in
BUG365. If several BSD208 or BUG365 messages appear which involve loop L
or if a BSD203 message appears involving loop L, the network for loop L is
probably faulty. See BSD203 comments.
Action: Go to LD 32. Use the commands STAT l and ENLL l to identify and
enable disabled loops. Replace the Network card if loops remain disabled.
Contact technical support staff if replacing loop l does not clear the fault.
 
Upvote 0 Downvote
Probably need to carry out OOH maintenance routine to Disable (LD 32 .DISL) Re-Seat and Enable (LD 32 .ENLL)that SuperLoop/ENET card '68' first then carry out in LD30 .TEST (Background Signalling Dignostics)and see if that runs clean

Cheers!!
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top