nortel vpn

[stevomorrison]

I am trying to set up my vpn client to my BCM 400 4.0 which is acting as the router as well. In the BCM i have ports 50, 51, 4500, and 500 forwarded from the external interface to the internal interface. When i try to log on i get this in the logs:
oakley aggressive mode proposal accepted on 192.168.20.1
BCM interface ipsec is trying to connect to is on the private network
Deleting ISAKMP SA
I have tried this on both my xp and vista machines without the windows firewall on.

 

[burtsbees]

Same network as the VPN is assigned? The VPN network needs to be on a different nw, or if it's on the same network (remote access VPN), then it cannot be NATted back out.

Burt

 

[stevomorrison]

I am not sure quite what ur asking. It is a remote access client. I am off site trying to access my BCM to use my soft phone.

 

[burtsbees]

How exactly is the VPN setup?

Burt