Does anyone know what port the Nortel Extranet Client for a VPN runs on? I have a Linux Firewall and need to config ipchains to open that port up. Says the Manager to the person that invented the modem: "Tell me again why you need two prototypes?!?"
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nortel VPN through Linux Firewall 1
- Thread starter slgordon
- Start date
-
1
- #2
ManagerJay
IS-IT--Management
I don't know what port the VPN uses, but this might work for you.
/sbin/iphcains -A input -s VPN.I.P.ADDRESS -d 0/0 -j ACCEPT -l
That should log all the inputs from the VPN's ip address to /var/log/messages.
Jay
/sbin/iphcains -A input -s VPN.I.P.ADDRESS -d 0/0 -j ACCEPT -l
That should log all the inputs from the VPN's ip address to /var/log/messages.
Jay
- Status
Similar threads