I currently work on a Meridian Option 61C, we will be upgrading it in the future to add VOIP capabilities. I would like to see if anyone can point in the direction of some good tutorials on Nortel VOIP or even give me a sample TNB (preferred) of a VOIP phone. I am trying to get a head start before we upgrade our switch. Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nortel VOIP
- Thread starter clinux
- Start date
The TNB's do not look that much different. Here is one from an old post using an ITG card.
DES ITG
TN 024 0 00 03
TYPE I2004
CDEN 8D
CTYP XDLC
CUST 0
ZONE 000
FDN 4101
TGAR 1
NCOS 5
RNPG 2
SCI 0
SSU
LNRS 16
XLST
SCPW
CLS CTD FBA WTA LPR PUA MTD FNA HTA TDD HFA
MWA RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFEA RCBD
CLBD AUTU
GPUD DPUD DNDA CFXD ARHD FITD CNTD CLTD ASCD
CFHD FICD NAID BUZZ AHD
DDGA NAMA
USRD ULAD RTDD RBDD RBHD OCBD FLXD FTTC MCBN
CPND_LANG ENG
RCO 0
HUNT 4101
LHK 3
SPID 6503
AST
IAPG 0
AACS YES
ACQ AS: TN
ASID 16
SFNB 2 5 6 9 10 11 12 13 15 16 17 18 19
SFRB 1 2 15
USFB 1 3 4 5 6 7 9 10 12 13 14 15
CALB 1 3 4 5 6 8 9 10 11 12
FCTB
ITNA NO
DGRP
PRI 01
DNDR 0
KEY 00 ACD 6000 0 6500
SUPY ACID 6503 KEY 47
01 SCR 4000 0 MARP
CPND
XPLN 21
DISPLAY_FMT FIRST,LAST
02
03 ADL 16
04 NRD
05 MSB
06
07
08
09
10
11
12
13
14
15
16 MWK 4101
17 TRN
18 AO6
19 CFW 4
20
21
22
23 SCU 0056
24
25
26
27
28
29
30
31
DATE 21 JAN 2004
DES ITG
TN 024 0 00 03
TYPE I2004
CDEN 8D
CTYP XDLC
CUST 0
ZONE 000
FDN 4101
TGAR 1
NCOS 5
RNPG 2
SCI 0
SSU
LNRS 16
XLST
SCPW
CLS CTD FBA WTA LPR PUA MTD FNA HTA TDD HFA
MWA RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFEA RCBD
CLBD AUTU
GPUD DPUD DNDA CFXD ARHD FITD CNTD CLTD ASCD
CFHD FICD NAID BUZZ AHD
DDGA NAMA
USRD ULAD RTDD RBDD RBHD OCBD FLXD FTTC MCBN
CPND_LANG ENG
RCO 0
HUNT 4101
LHK 3
SPID 6503
AST
IAPG 0
AACS YES
ACQ AS: TN
ASID 16
SFNB 2 5 6 9 10 11 12 13 15 16 17 18 19
SFRB 1 2 15
USFB 1 3 4 5 6 7 9 10 12 13 14 15
CALB 1 3 4 5 6 8 9 10 11 12
FCTB
ITNA NO
DGRP
PRI 01
DNDR 0
KEY 00 ACD 6000 0 6500
SUPY ACID 6503 KEY 47
01 SCR 4000 0 MARP
CPND
XPLN 21
DISPLAY_FMT FIRST,LAST
02
03 ADL 16
04 NRD
05 MSB
06
07
08
09
10
11
12
13
14
15
16 MWK 4101
17 TRN
18 AO6
19 CFW 4
20
21
22
23 SCU 0056
24
25
26
27
28
29
30
31
DATE 21 JAN 2004
captaingadget
IS-IT--Management
I have a number of PDF's but not sure how to deposit them on this site, if indeed this is possible.
speakerboy
Programmer
Now days Nortel will want to upgrade your 61c to cpp4 cores with 4.5 and maybe even 5.0. I have heard that it is close out of beta.
With this you will probably get a signaling server with network routing service.
The latest model of phones out ore the 1100 series phones 1120 1140 1150.
To program these in this new scenario you would need to build a virtual loop. Building sets directly registering to an itg card is over due.
Example to build a virtual loop.
LD 97
chg supl
v96 (basically the same method as phantom tn.s but called virtual)
This gives you I believe 61-65 and 81-85 virtual loops, It will tell you in the ntp. (ex. 61-0-0-0 thru 61-0-0-31)
To build for example a 1140 series set.
ld 20
new
i2004
cust 0
tn 61-0-0-0
and so on.
key will be 0 thru 5 and you will have to look in the ntp for other designated keys.
One new thing that you will see in the set programming is the virtual zone that it is in.
This has to do with the zones that you have built in your signaling server.
Keep in mind also that if you do voip enable this 61c you will also have to media cards which are 32 port itg cards, on these cards you build vgw channels. These are nothing more than codecs that translate ip or packet switching to tdm switching.
This is just the tip of the ice berg of what you will be able to do.
Hope this helps.
With this you will probably get a signaling server with network routing service.
The latest model of phones out ore the 1100 series phones 1120 1140 1150.
To program these in this new scenario you would need to build a virtual loop. Building sets directly registering to an itg card is over due.
Example to build a virtual loop.
LD 97
chg supl
v96 (basically the same method as phantom tn.s but called virtual)
This gives you I believe 61-65 and 81-85 virtual loops, It will tell you in the ntp. (ex. 61-0-0-0 thru 61-0-0-31)
To build for example a 1140 series set.
ld 20
new
i2004
cust 0
tn 61-0-0-0
and so on.
key will be 0 thru 5 and you will have to look in the ntp for other designated keys.
One new thing that you will see in the set programming is the virtual zone that it is in.
This has to do with the zones that you have built in your signaling server.
Keep in mind also that if you do voip enable this 61c you will also have to media cards which are 32 port itg cards, on these cards you build vgw channels. These are nothing more than codecs that translate ip or packet switching to tdm switching.
This is just the tip of the ice berg of what you will be able to do.
Hope this helps.
- Status
Similar threads
