I have a very strange issue. I have and OPT 61C RLS 4 on one end and a OPT 11C RLS 3 on the other. We are using the CISCO 2811 to route calls both ways over the customers network. For some reason, if I call from the OPT 11 thru the CISCO'S and out the OTP 61 one call leaves the 11 and 2 calls are placed out the 61. Any ideas ????
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nortel to CISCO
- Thread starter mlindbeck
- Start date
Similar threads
- Locked
- Question
- Locked
- Question