Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel to Cisco Tie Line question

Status
Not open for further replies.
Ski123

Ski123

Technical User
Mar 21, 2008
239
US

PRI241 DCH: 40 DATA: 00000010.Any ideas on how to resolve this error? This error is being generated on a PRI connection between a Nortel and a Cisco Call Manager.Both the Nortel and Cisco reside in the same room so they are connected with a direct cable no telco circuit is involved. There are 8 PRI's between the two systems and this is the only one with the error.



 
Sort by date Sort by votes
Wycap, Not sure if it is a Xover cable but they have been up and running for a few years now. Just not sure why we are now getting the PRI241 DCH: 40 DATA: 00000010 errors on the Nortel now.
 
Upvote 0 Downvote
What does the cisco router show when you show the controller?
What about show isdn status?
I don't know what that error means since it is from the nortel switch.
Have you tried resetting it?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

mikedphones
  • Locked
  • Question
MASS - Looking for a Cisco Call Manager support tech to move and reconfigure
Replies
0
Views
380
mikedphones
mikedphones
keyset6
  • Locked
  • Question
No Line Text Label on 9841 phones
Replies
0
Views
287
keyset6
keyset6
Russell35674
  • Locked
  • Question
Cisco VG310/320 migrate from SCCP to MGCP
Replies
1
Views
386
whykap
whykap
Gnjiro
  • Locked
  • Question
Cisco Ip Phone 7841, 7821 Delay when making call both inbound and outbound in sip protocol
Replies
3
Views
424
thepfy
thepfy
keyset6
  • Locked
  • Question
Access line in use from Jabber
Replies
2
Views
255
keyset6
keyset6

Part and Inventory Search

Sponsor

Back
Top