Nortel T7316

[JesusAngel]

Hello everyone!
How could I add a line (trunk line) to a t7316 key set? The number that Im trying to add to let's say extension 2221 is at extension 2225. X2225 has only one line assigned to it and is the one I need at x2221. X2221 has three line assignments right now 001,002,and 003.
Thanks!

Jesus

 

[JesusAngel]

Hello everyone!
How could I add a line (trunk line) to a t7316 key set? The number that Im trying to add to let's say extension 2221 is at extension 2225. X2225 has only one line assigned to it and is the one I need at x2221. X2221 has three line assignments right now 001,002,and 003.

Please any advice!
Thanks,
Jesus

 

[Multimedium]

Line assignment is done in programming: Terminals & Sets > Line Access > Line Assignment.

The Installer Guide contains detailed instructions on how to access programming and how to assign lines to a set. It can be found online in PDF format.

 

[phoneguy610]

to add on to above in system programming once you get to line assignment you need to set these lines to appr & ring

ddcommllc.com
Avaya/Toshiba/Nortel

ACIS

 

[JesusAngel]

Multimedium and phoneguy610 thanks for the advice I will try this steps.

J.A.