Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel SL-100 Tape Drive

Status
Not open for further replies.

jighed

Programmer
Jun 7, 2007
11
US
The tape drive on our sl-100(msl 10) thinks it is demoounting a tape. I can't busy, test, power off, demount or mount a tape. It gives me an error saying "wait until tape is finished demounting". I've replaced the I/O controller and tape controller. Any suggestions would be appreciated.

A man once said, "a good tech ain't afraid to do something stupid.
 
WHAT'S A TAPE DRIVE

OLD ROLMEN WORKING ON NORTELS AND AVAYA
 
Jighed,

Humm, have you tried to delete it out as an I/O Device and then put it back in?? is it on an IOC or an IOM? And is it a Magnetic Tape or a SLM drive? You could always try going to the cabinet and physically unplugging it and plugging it back it, that will reset them too.

Perry,

We are talking real switches here, all you CS1000 folks step aside.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top