We have a Succession 1000M Multi Group 060E Signalling server and need to know where we can change the default IP gateway for the customer LAN. This would be the same gateway that is specified on the IP phones themselves to make sure I am explaining it correctly. Can anyone help? Thanks in advanced!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nortel Signaling Server Gateway? 1
- Thread starter tex52
- Start date
-
1
- #2
I'm assuming you want to change the TLAN gateway on the node. Log into Element Manager, look under IP Telephony, Nodes/Servers/Media Cards, then click Configuration. Edit the node, open the signalling server, change the Voice LAN (TLAN) gateway address, then click Save and Transfer. If you need to restart the sig server, it will tell you. I can't remember if a reboot is necessary for this change or not.
- Status
Similar threads
