Nortel option 61 to Definity G3 using T1 tie

[mlinman]

I'm trying to connect a G3 to a a Nortel option 61 using T1 cards. The T1 card in the Definity is a TN767E. The card in the Nortel is QPC720F. If anyone has any advise on how to program either or both cards, it would really help out. I'm told the Nortel we are using doesn't support ISDN so I have to use older T1 programming.

I know how to program the Definity, just need the settings for the card. I only know a little about the Nortel so I would need more step by step instructions.

Any help/advice would be great, thanks for your time.

 

[Reusser]

Here is a printout of a route and trunk setup that would work for you - make sure the G3 signaling is setup the same (4 wire e&m, wink start)

TYPE RDB
CUST 00
ROUT 4
DES ACCESS
TKTP TIE
ESN NO
CNVT NO
SAT NO
RCLS EXT
DTRK YES
DGTP DTI
ISDN NO
DSEL VCE
PTYP DTT
AUTO NO
DNIS NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 7904
TARG 01
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
ANTK
SIGO STD
STYP SDAT
TIMR ICF 384
OGF 384
EOD 4096
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
TFD 0
SST 5 0
NEDC ETH
FEDC ETH
CPDC NO
DLTN NO
HOLD 02 02 20
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR YES
INC NO
LAST NO
TTA NO
QREC NO
OAL YES
AIA NO
OAN YES
OPD NO
NATL YES
MUS NO
MANO NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
OHQ NO
OHQT 00
CBQ NO
AUTH NO
TTBL 0
OHTD NO
PLEV 2
ALRM NO
ART 0
SGRP 0
AACR NO

TN 019 17
TYPE TIE
CDEN SD
CUST 0
NCOS 4
RTMB 4 1
TGAR 1
SIGL EM4
STRI/STRO WNK WNK
SUPN YES
CLS UNR DTN WTA LPR APN THFD HKD
P10 VNL
TKID
DATE 19 NOV 1997

 

[Guest_imported]

This is correct. We have it working. You lose Call Party Name Display without PRI on the Nortel. If you have PRI you would need latest version QSIG on Definity to make calls totally transparent, and a coordinated dial plan. But it works. We do it.

 

[mlinman]

Thanks for the input!!! We are programming the Nortel now. I will post results in the next day or two.