Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel Option 11 R25.40 C*NET T1 Trunks

Status
Not open for further replies.

CTRAU

IS-IT--Management
Mar 2, 2007
62
US
Dear Users: I have a Nortel Option 11, running 25.40. It has 2 DTI Trunk Cards installed. DTI card #1 is for DID Incomming calls. DTI card 2 is for both listed Directory Numbers and "dial 9" local access. I want to connect these two T1 trunks to C*NET "service". I know I will need 2 CSU's which i already have. How do I connect these two devices to "C*NET" Network. I have a dedicated IP address running at over 100MBS from Optimum. What hardware do I need to connect to my Optimum Router to interface with my two CSU's? Please be specfic as possible in suggesting hardware to access C*NET over my existing Broad Band service and how each device is configured. I'm good with NORTEL be an absolute NOVICE when it comes to "data" communications and hardware. Step By Step instructions is probably best. Thanking you in advance.... CTR
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top