Nortel NT7B74GA-93 Digital Trunk Interface Card and ATT IP Flex Compatablity

[333zzz]

thread798-1648376

We have a Norstar MICS with a NT7B74GA-93 Digital Trunk Interface Card connected to a PRI circuit and are about to switch to
ATT IP Flex. They are asking if it is a TDM PRI. That should work with our system shouldn't it?
The phone system settings are:
System: Nortel MICS

Cd1-KSU: PRI
Card Type: PRI
Lines: 001-023 Only using (1-12)
Protocol: NI-2
BchanSeq: Descend
CO fail: TIA-547A
I/F Levels: ISDN
Framing: ESF
Internal CSU: On
CSU Line Bld: 0
Line Coding: B8ZS
Clock Src: Primary
Rec'd Length: 3
DN Length: 3

Cd2-KSU: Loop
Card Type: Loop
Lines: 025-028

Any help would be appreciated!

 

[smokinjoe2938]

you are in the wrong forum!

acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.

 

[333zzz]

Sorry about that smokinjoe2938