Nortel Modular ICS maxed out? three questions 1

[telemarksman]

1. How many stations come with the Modular ICS Ksu only?

2. IF I have no PRI card, 5 M12 x 0 modules and 3 M 0 x 16 modules what is my configuration Lines by extensions?

3. What is the Maximum I can get out of this KSU with modules, but no PRI?

4. Am I correct to assume the CALL PILOT 150 will use 4 of those available stations?

THANK YOU!

alwayslearning

 

[luv2ski]

1.32 stations on ksu
with newest software and 2 6 port exp card you can have any config u want
0x32 with 12 stat mod
0x32 with 12 trunk mod
you do the math
older software last 2 ports on 2nd exp card were reserved for companion so could not be used for trunk or station

2. 60 trunks + ksu has 2 slots for total avail of 68
32 +48= 80 stations
3. answered with question 1

4. yes 4 ports for 8 channels on cp 150

6 months until ski season starts...sadly i must resign myself to the warmer weather"this will include a normal 8-5 work day, 5 days a week"

 

[telemarksman]

luv2ski are you saying KSU has 32 ports with the newest software? , or does the KSU automatically come with 32 stations no matter what version of software?
Thanks!

alwayslearning

 

[telemarksman]

P.S. guys/ gals, how can I go back in later and modify my post? Thanks

alwayslearning

 

[curlycord]

MICS has 32 ports no matter what software.

You cannot edit posts....there is a feature to check before you post.



=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[luv2ski]

newest software gives u 12 exp port old gives u only 10
believe u must have xc software to get full 10 or 12 exp ports

6 months until ski season starts...sadly i must resign myself to the warmer weather"this will include a normal 8-5 work day, 5 days a week"

 

[telemarksman]

if I add a M 0 x 16 do I need to power down MICS first, or restart system after adding module? or do anything in programming so system sees new module?

Thanks

alwayslearning

 

[DaveThePhoneDoctorLV]

You would network several MICS together for a larger system. Does not MICS stand for "Modular Integrated Communications System"?

 

[curlycord]

Just hook up all wiring and fiber cable then power on the 0X16 and give it a few minutes if that.


=----(((((((((()----=
curlycord

http://www.curlycord.com