nortel mics t1 to pri conversion

[phoneman8006]

I have a cust with nortel mics. they currently have a t1. Its been quite a few years since i programmed a pri. what are the requirements to change from a t1 circuit to a pri circuit. Is it just simple a programming the system, or are keycodes required? Do i need to change out the trunk card?

 

[curlycord]

Key code for PRI
DTI card
Programming

All right here for ya:

http://www.tek-tips.com/faqs.cfm?fid=1646

Make sure the software's for KSU and voice mail are upgraded, post both your versions for accuracy.




=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[exsmogger]

As curlycord wrote, your software version is important. I'd recommend going to R7.1 with a release 02 NVRAM cartridge when installing a PRI.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952