filoloxnyc
MIS
Hi All,
We must tie together three locations with voice and data over private DS0/PTP-T1 lines. We really like the functionality of the MICS, the centralized voice mail, caller id features and the phones. I was told PRI SL-1 is the only way to use centralized voice mail.
The other caveat is the need to use 12 channels for voice and the remaining 12 channels for data on the DS0/PTP-T1's. We have been looking at several Cisco WIC modules for the 2600 routers but so far we see the NM-2CT1-CSU as the solution for just voice but no data over the DS0/PTP-T1's.
Does anybody have suggestions?
So far, looks like we're going to order:
1 Voice T1 from a Telco to Central Site
1 Private DS0 Point to Point T1 from Central Site to Remote Site A
1 Private DS0 Point to Point T1 from Central Site to Remove Site B
3 MICS
3 6.0 or 3 6.1 software
3 PRI Enablers
5 DTI Cards
3 MCDN Enablers
1 CallPilot 100 or 150
3 RAD
4 Cisco 2611 Routers
Have a great day!
We must tie together three locations with voice and data over private DS0/PTP-T1 lines. We really like the functionality of the MICS, the centralized voice mail, caller id features and the phones. I was told PRI SL-1 is the only way to use centralized voice mail.
The other caveat is the need to use 12 channels for voice and the remaining 12 channels for data on the DS0/PTP-T1's. We have been looking at several Cisco WIC modules for the 2600 routers but so far we see the NM-2CT1-CSU as the solution for just voice but no data over the DS0/PTP-T1's.
Does anybody have suggestions?
So far, looks like we're going to order:
1 Voice T1 from a Telco to Central Site
1 Private DS0 Point to Point T1 from Central Site to Remote Site A
1 Private DS0 Point to Point T1 from Central Site to Remove Site B
3 MICS
3 6.0 or 3 6.1 software
3 PRI Enablers
5 DTI Cards
3 MCDN Enablers
1 CallPilot 100 or 150
3 RAD
4 Cisco 2611 Routers
Have a great day!