Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel MICS FastRad help

Status
Not open for further replies.

Macgyver16502

IS-IT--Management
Aug 11, 2015
6
US
Ok, let's start with I'm an IT guy not a phone guy...

Working at a company with a Nortel MICS 4.0 (SP: 30mkF01 NAT) system.
I have purchased a Fastrad and have it connected to the system, and I'm trying to set up for direct connect to a pc.
First, is the serial cable supposed to be a null modem cable? I assumed so, since the FastRad seems to be geared to work with a modem...
Second, how do I set up for direct connection in the Nortel phone system? I've created a system ID and a password. And told it to auto answer. But, I'm not sure where to go from there...

I appreciate any help you all can offer.
 
FastRad IS a modem. No NULL modem cable. Feature 9** to configure Fast Rad. Need NRU Norstar Remote Utilities software to use FastRad.

 
Cool, I ordered a new serial cable. I already have an XP vm running in VMWare with the physical serial port connected to the VM and NRU 11 installed on the VM.
Thanks for the information.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top