Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nortel MIB's into HP OV
- Thread starter zev
- Start date
Go to the Nortel website, go to the support/downloads section, and search for the models you have. There will be a "MIBs & Router Scripts" download section that should display the latest MIBs - make sure you download the MIB that matches your OS rev. on the Nortel device.
Once you've DL'ed the MIB, the next steps depend on which OV app you are using - I assume NNM? If so, use the TOOLS mennu to locate the MIB installation utility.
Once you've DL'ed the MIB, the next steps depend on which OV app you are using - I assume NNM? If so, use the TOOLS mennu to locate the MIB installation utility.
- Thread starter
- #3
The only question about that is that they tend to have more than one MIB for the devices. In other words, when I look for the MIB for the 8000 passport series I download the file and it has 20 MIB's in it...there are MIB's for services like ATM etc...not the devices themeselves. Do you add all of them (and that would make them compatible) or are they not the MIB's I am looking for?
Z
Z
- Status
Similar threads
- Locked
- Question
- Locked
- Question