Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel Meridian Opt 61c and 10 Digit Local Dialing...

Status
Not open for further replies.

Casey Jordan

Systems Engineer
Jul 5, 2022
5
US
Hello,
Our company owns a Nortel Meridian Option 61c PBX. I have a modest amount of knowledge about how to program everyday changes, but I do not know a lot about configuring dialing plans and more in-depth features.

The local carrier recently changed over to 10 digit local dialing. Our 61c does is not configured for this. It automatically dials out after receiving 7 digits from a handset. I can complete a call by dialing local numbers like long distance numbers, but that's not a real solution. Would there be anybody with 61c knowledge willing to help me reconfigure our dialing plan for 10 digit local dialing? I understand LDs and PRT commands and general system syntax, just not where to look to change what needs to be changed.

Thanks,
Casey
 
Hello Casey

It's probably a "FLEN" length that needs to be changed and increased by one digit.
Use the attached guide to get a list of all your networking information.
It's most likely that you will need to make the change in LD 90.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top