NORTEL meridian CS 1000 messages

[mehar1]

I am using NORTEL CS 1000
and programming is carried out by procom plus
it always shows the messages how can I stop these messages

messages are like DTA 300
DTA 301
DTA 302
..
...
..

 

[Wanebo]

err dta301
DTA0301 loop
A slip deletion has occurred on PRI2 loop.
Severity: Minor

err dta302
DTA0302 loop
A slip repetition overflow has occurred on PRI2 loop.
Severity: Minor


You should correct whatever is causing one of your PRI circuits to slip. Likely clocking.

 

[mehar1]

Dear Wanebo

I am not expert enough,
please guide me that what I have to do.
it will be great help if you tell me the steps wise what to do

thanks

 

[Firebird Scrambler]

You will probably need to go into LD 60.

Try SSCK 0
Your System needs to be "LOCKED" so that it is syncronised with your carrier.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin

 

[mehar1]

ok
thanks
let me know how to lock the system

 

[Firebird Scrambler]

It may depend on the version of hardware you have.

Try in LD 60

DIS CC 0

then ENL CC 0

finally SSCK 0

There are other commands where you can force it to track on a particular ISDN bearer.

You will need to refer to the PDF but I think they were something like

TRCK PCK xx (xx = ISDN card slot)

Also try TRCK SCLK (to make the clock active)

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin

 

[mehar1]

dear FirebirdScrambler

I have tried it but the error message still coming

 

[Firebird Scrambler]

You should print off the information that you have in LD 60.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin

 

[mehar1]

Dear
FirebirdScrambler

your kind guidance is required please how to print off the information in LD 60 ?

 

[LittleMaster]

1. LD 60
.LCNT X (LOOP NO)

. SSCK 0
. SSCK 1