Nortel IP Set 1150E 1

[DocRobotnik]

Hi everyone !

I just got on my hand a 1150E. My biggest hurry was to try it because i never had this model... First of all the set was not able to find the DHCP.. okay i did a **renewMAC## it reboot and now it work !
Find it dhcp and the server... but it stuck at Connecting to Server.... I tryed it on a BCM50R6 and 450R6 same result on both, never get over on Connecting to server, i never got the Ip Registration menu, BUT the unit upgraded to the lastest software ! Terminal Dn: NIL_DN: firmware version being upgraded from 0627C8Q to bcmmode\0627C96.bin

I think maybe the BCM planned to support it but maybe finaly don't really support it...

Any idea ?

Thanks,
Mike

**********************************
* Doc Robotnik
* Network & Hardware Administrator
* Likedin

 

[telcodog]

Not compatible with the BCM50/450. The BCM's do not recognize type 6 devices (that's what an 1150e reports as compared to type 2 by 1140's etc). Only operates properly on CS1K and emetrotel UCX.

 

[DocRobotnik]

Thanks for the info !

Ucx is the next platform i wish to explore. So i will keep it !

**********************************
* Doc Robotnik
* Network & Hardware Administrator
* Likedin