Nortel IP address changes Part 1

[wl7coe]

Our Agency in it's wisdom has decided we must all change IP
schemes. So I have to re IP the Voip side of the switch.
(Meridian release 25)

In OTM under services - ITG IP Phones - there is a Node IP
and two cards Leader0 and Leader1 each with a Voice IP setting. The Question is as far as the Voice IP setting is this the only place I change the IP's? (And the phones I know)

And if one did not have OTM what LD would be used?

I have another question but am posting it as an seperate question.

Thanks!

Tim C

 

[Reusser]

You must use OTM to setup the node and voice ip

Your management ips - the two IP cards and the one or two from the switch could be left on their own little network with no connection to your company network. You would just need the OTM as part of that little network