nortel i2001 Ip phone

[lordluis2000]

Hi I got a nortel i2001 phone. This has already an IP address. I used a sniffer to get the information. But I do not how to do to reset the phone to default values.

This is that I get from the sniffer.
1 0.000000000 10.12.32.139 192.168.125.100 UDP 60 Source port: 5000 Destination port: 4100

I read something about use TFTP Server but I am completed lost

Regards

Luis

 

[ucxguy]

[ul]
[li]Power on the phone[/li]
[li]Wait for message “Nortel Networks”[/li]
[li]While the “Nortel Networks” message is showing, press the four softkeys below the LCD screen from left to right. If you see “Locating server”, you weren’t fast enough (power off the phone and try again).[/li]
[li]In the configuration that is presented, you can use either full DHCP (if the DHCP server is running on your BCM), partial DHCP (if the DHCP server is running on a router) or no DHCP.[/li]
[li]If you used partial or no DHCP, set the S1 IP and port and S2 IP and port to the BCM IP address and port 7000.[/li]
[/ul]

 

[lordluis2000]

thanks a lot ucxguy this was really helpfull

Now I have the control of the phone


Luis M.