nortel evt code 799-00010E

[mermansr1]

can't find and explanation or fix. Is this a service card issue or a software cartridge problem. Also looking at the logs find that there has been a problem with s station mod disconnecting could all of this be related to the combo card?

 

[curlycord]

Fix to what? you have not mentioned what the issue is.
As for Station Mod try another spare port, if out of ports make sure set relocation is on and switch with another port.
Try another fibre cord if still an issue.
Is there more info on the station mod error?

799: ISDN_CP_Error P7 'B' Trace TestLog
799: | CAUSE:
799: | A call processing error has occured on an ISDN line.
799: | ENVIRONMENT
799: | The first parameter identifies the location (line number
799: | or loop number). The second parameter is an error code,
799: | defined as follows:
799: | 1: Can't acquire the B-channel from the B-channel Arbitrator.
799: | This indicates an internal software error.
799: | 2: There is no free line available for the call (internal error).
799: | 3: A non B-channel call has been attempted. Such calls are
799: | not supported in this version of software.
799: | 4: Failed to instantiate on the chain (internal error).
799: | 5: Activation procedure failed (internal error).
799: | 6: Index conversion failed (internal error).
799: | 7: Unexpected digits on Manual Answer line. Possible
799: | Network / Norstar configuration mis-match.
799: | 8: Can't seize CO line on a BRI (internal error at the
799: | driver or card level).
799: | HUMAN ACTION:
799: | None.

________________________________________

Add me to LinkedIN

=----(((((((((()----=

http://www.curlycord.com

Toronto, CAN