Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel ERS 5520 (Bay stack 5520 48T-PWR

Status
Not open for further replies.

don2119

Technical User
Aug 13, 2008
91
US
This baystack 5520 is Hardened is their a way to reset the configuration to the default without the Password. The person that hardened this unit cannot find the Password.
Been trying to find info, but have not seen any yet.

Any help wouldbe much appreciated!

Thank you.
 
See below.

Follow these steps:
1. Connect to the switch through a console connection.
2. Reboot the switch.
3. During the boot process, press Control + C to access the boot menu.
4. Select option 'i' to initialize the switch. This defaults the unit.
5. Enter 'y' to confirm your selection. The switch will return to the boot menu.
6. Select option 'a' to run the switch with its new configuration.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top