Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel Digital Mobility Service Kit

Status
Not open for further replies.

curlycord

Programmer
Sep 22, 2002
14,188
Toronto, Canada
Does any one know if the
NT7B65LKE6 - Nortel Digital Mobility Service Kit
is the exact same as the
02319508 - Polycom Programming Kit for Repeater and Base Station

Since it's all "Kirk" I cant see why it would be different wiring.

At the same time I am thinking it's s standard RJ45 to Serial console cable.
If it was then I could buy it separate along with something similar to this adapter.
But I do not know the wiring scheme.




________________________________________
small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
They mostly likely did...
Kirk was Kirk and they started to brand for Nortel when BCM came out.
Sepctralink acquired Kirk
Polycom acquired Spectralink

I am guessing the wiring is the same for what I want but will assume firmware's are all different for the, controller, base stations and handsets.





________________________________________
small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
I have the service kit somewhere in my stuff but have to find it. I remember it was a serial cable with a rj11 slitter that on cable goes to the repeater you need to program and second cable goes to the serial cable that sends the programming out , connected to the pc/laptop over serial port and using the special software tool that controls the programming.
Hope it helps.

Nikos
 
Thanks, I am just wondering if Polycom's version of the Kit is the exact same.

If it is I may just purchase it instead as it is half the price, but knowing the pin outs would be even better as I could just as easily make a Y splitter.










________________________________________
small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top