I was wondering if anyone has experienced this issue. T-1 QSIG integration from Nortel CS 1000 to MM Dialogic cards. For some reason D Channel goes down but the Dialogic Card does not see any issues. We have to reboot the MAS completely and reset the Nortel D Channel T-1. Together the ports come back up as normal and are ooperational again. We think there is a pattern of like 19 days then it goes out. Any thoughts?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nortel CS1000 to MM Dialogic Disconnect
- Thread starter jjamjr
- Start date
Does your Nortel do maintenance on your trunks/D-channels? I had seen a similar issue when CS 1000 was jus released by Nortel and it was resolved by making sure the Nortel is patched appropriately with the latest patches.
- Thread starter
- #3
Hello Texeric, I have sent an e-mail asking Nortel on the CS1000 "T" server if it is doing D Channel Maintenance. Would you by chance know the patch number Nortel updated in your system that stopped the D Channel from dropping? Thanks, jjamjr
Unforunately no, it was for a customer years ago when Nortel first released their CS1000.
- Status
Similar threads
- Locked
- Question
- Locked
- Question