Hi. Our system is no longed indicating incoming messages or clearing the indicator light when messages have been listened to. I assume it is some sort of MWI failure, I have rebooted the server but this does not clear the problem. Would welcome any thoughts or suggestions? Thank you!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nortel CallPilot MWI Failure
- Thread starter JEFBEL
- Start date
Did you just reboot the system or did you run through the config wizard and reboot it at the end of that?
There is a big difference. Running through the config wizard and the subsequent reboot resets the DSP's and a few other things. If you haven't done that you should.
There is a big difference. Running through the config wizard and the subsequent reboot resets the DSP's and a few other things. If you haven't done that you should.
- Thread starter
- #3
- Status
Similar threads
