Nortel Call Pilot Mini

[EngMajdi82]

Hello ...

I have a Nortel CallPilot 150 Mini, connected to meridian option 11, the CF is:

Rel 02
CPMINI REL 1.6 CF

and not working
where can I find this version of software ?

Thanks

 

[Firebird Scrambler]

Are you sure that the compact flash has failed?. I thought that the Call Pilot mini versions used an 8 meg ATA card which looked like a PCMCIA card?.

My experience of these systems has always been a faulty power transformer. Have you checked that you have any voltage?


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[Crowtalks]

I agree with Firebird that the usual suspect is power supply...does the Call Pilot have any lights?

Jim

"If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

NCSS, NCTS, NCTE, CS1000E, Avaya IP Office, Mitel 3300 Basic & Advanced, 5000, SX200, NuPoint

 

[EngMajdi82]

Hi ...

when power on all the led light is on for a second, after this just the LED labled A is flashing quikly, when connect an ethernet cable to lan port, and ping to 192.168.110.10, there is a replay, but when try to open webpage, nothing. the web page canot be displayed


Thanks

 

[Firebird Scrambler]

Check with a volt meter that you have the correct DC volts in case the power transformer is still faulty by not supplying enough power to the main unit.

Failing that, you might have a faulty Call Pilot Mini system unit. The fact that you get a ping reply would indicate that the power unit is OK, but you would really need to compare it with a spare system.




Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley