Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nortel BCM50

Status
Not open for further replies.

Joshua.T

Technical User
Mar 6, 2021
1
CA
Hi, I have a nortel release 5.0 bcm50 system, it’s used and I don’t have the login information. I tried to do a level 1 reset where it erases all previous costumer data but still doesn’t seem to work. When the system initializes the bottom power status light is green and the top nortel logo one is red. When I hit the reset button it just reboots and goes back to it’s Normal state which I still can’t login to the Element manager. But when I have a digital set hooked up and tried to login from there it would just say access denied.
Any Help?
Thanks.
 
The Level 1 or 2 reset method changed at release 5 onwards. You need to do a search and contact those people who are able to point you in the right direction. At release 5 and 6, a copy of the keycode should exist on the motherboard, but be careful that you don't erase it.

If you aren't bothered about any configuration, and that you can get hold of a 80 gig hard disk, then you can install the release 5 software onto it and insert it into the BCM 50 to log in with default details.

The attached file should help.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
It's also good time to also upgrade it to R6 (yes still possible) because it's much easier on a lab rat than a live system.


________________________________________
small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top