May 2, 2022 #1 SVdP IS-IT--Management Dec 16, 2020 2 US Has anyone taken an old Nortel BCM50 and converted it to a VOIP system and connected to SIP Trunk servers? if so, are there any "instructions" on how to do that?
Has anyone taken an old Nortel BCM50 and converted it to a VOIP system and connected to SIP Trunk servers? if so, are there any "instructions" on how to do that?
May 3, 2022 #2 curlycord Programmer Sep 22, 2002 14,204 Toronto, Canada The BCM has been a hybrid system since inception with both digital and IP phones. SIP Trunks is best with Release 6 You may need an upgrade and also keycodes to have the SIP Trunk capability. Look at the very bottom of the BCM FAQ page for SIP Trunks by assorted carriers All guides are all on the BCM itself via the main web page. In future the BCM forum is here =----(((((((((()----= http://www.curlycord.comToronto, Canada Add me to LinkedIN Upvote 0 Downvote
The BCM has been a hybrid system since inception with both digital and IP phones. SIP Trunks is best with Release 6 You may need an upgrade and also keycodes to have the SIP Trunk capability. Look at the very bottom of the BCM FAQ page for SIP Trunks by assorted carriers All guides are all on the BCM itself via the main web page. In future the BCM forum is here =----(((((((((()----= http://www.curlycord.comToronto, Canada Add me to LinkedIN