Kyra.Johnson
IS-IT--Management
What is the best way to identify the main phone lines in a group on in the BCM?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nortel BCM50 Main phones
- Thread starter Kyra.Johnson
- Start date
- Status
curlycord
Programmer
Look at your invoice to see what lines are in what groups.
or if all lines are at reception put line 1 on hold, call in and see if it rolls to line 2 and if so put lines 2 on hold as well and keep doing that until you get a busy signal or a mailbox that the carrier supplies/controls.
________________________________________
=----(((((((((()----=
Toronto, Canada
Add me to LinkedIN
or if all lines are at reception put line 1 on hold, call in and see if it rolls to line 2 and if so put lines 2 on hold as well and keep doing that until you get a busy signal or a mailbox that the carrier supplies/controls.
________________________________________
=----(((((((((()----=
Toronto, Canada
Add me to LinkedIN
- Thread starter
- #3
Kyra.Johnson
IS-IT--Management
Thank you - how can i delete a thread>
- Status
Similar threads
