Nortel BCM Time Display Trouble

[overthebars]

I installed this BCM about a year ago and have an intermitting problem of the time jumping around. Because it is in a school the teachers use the clock on the T7208 for class period legnths. Have any of you guys ever run across this and/or have a solution? I have set up the entire systen with IP phones and 7208s with voicemail with no problem. I just didn't think something like the time on the display would be what would jump up and bite me in the rear. Any help will be much appreciated.

 

[telebub]

I installed 2 BCM 50s a couple of years ago, give or take a little, and they both had an issue with time either increasing by about 10 minutes a day or decreasing 10 minutes a day, I forget. There was a patch that fixed it on both systems. You might verify the BCM is up to date on PEPS.

War Eagle!!

 

[curlycord]

Make sure Auto Time and date time is turned off?

Everytime a call comes in it sense the time from the Caller ID and adjust's itself to it.


=--(((((((((()--=
curlycord

http://www.curlycord.com