I've been made the phone guy this week and am having some issues with the ASM8+ Module in our Nortel BCM. The top light is blinking red to orange to red .... what's going on? Is the unit garbage and need to be replaced? I've tried rebooting the system but that didn't help. Thank you for any advice.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nortel BCM ASM8+ Module Help
- Thread starter ScottSass
- Start date
Sounds like the dip switches aren't configured properly and/or there is a DS-30 bus conflict with an existing module.
Check the BCM documents and make sure that you have the dip switches set correctly, and also make sure that what you are setting them for doesn't conflict with anything else that is already in the system.
Check the BCM documents and make sure that you have the dip switches set correctly, and also make sure that what you are setting them for doesn't conflict with anything else that is already in the system.
acewarlock
Technical User
What are the switch setting set to?
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question