Hi, I am just wondering if anyone has encountered this problem, and what steps they took to resolve it. We have a bcm50 at our main office with 5 digital extensions. We also have 4 satellite offices with ip extensions (i2004). The system works fine but we are having trouble communicating between remote sites. From main office to remote site, there is no problem. You can dial the extension as if you are in the same physical location. However, from 3 of the 4 remotes, when you dial another remote site, although the call connects, once you pick up, you just have silence. The 4th site works fine and you can call other remote sites without a problem. Anybody know how to resolve this? Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nortel BCM 50 - remote ip extension to remote ip extension
- Thread starter fern26
- Start date
kwing112000
Vendor
I think you may want to post this in the nortel forum
Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries
Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries
- Status
Similar threads
- Locked
- Solved