Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nortel 6x16 DR5 1
- Thread starter golfpro1
- Start date
curlycord
Programmer
NT8B88FA is the Caller ID interface called a C6 module.
You need to bridge it with the lines before the 6X16.
The 6X16 will need DR5 software.
=----(((((((((()----=
curlycord
You need to bridge it with the lines before the 6X16.
The 6X16 will need DR5 software.
=----(((((((((()----=
curlycord
The M8 will also work with a 616 DR5. Good luck finding either one of these modules.
Brian Cox
Georgia Telephone
Brian Cox
Georgia Telephone
-
1
- #4
GordonKapesMZ4
Programmer
I have an M8 sitting in my basement storage locker here in Chicago....preconnected to a 66 block....waiting for someone who really needs it! 
****New Forum - E-Metrotel UCx****
Joseph Sus-Nortel Installer/Programmer-"JoetheUCxguy" on Youtube
****New Forum - E-Metrotel UCx****
Joseph Sus-Nortel Installer/Programmer-"JoetheUCxguy" on Youtube
- Thread starter
- #5
GordonKapesMZ4
Programmer
Hey please check my link below and watch some of the videos, you'll see my number
On the Nortel phones display. we are not allowed to post numbers on here....
****New Forum - E-Metrotel UCx****
Joseph Sus-Nortel Installer/Programmer-"JoetheUCxguy" on Youtube
On the Nortel phones display. we are not allowed to post numbers on here....
****New Forum - E-Metrotel UCx****
Joseph Sus-Nortel Installer/Programmer-"JoetheUCxguy" on Youtube
- Status
Similar threads
- Locked
- Question