Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nortel 6120 and 6140 Cordless Phones
- Thread starter ITteleGuy
- Start date
Copied from an older thread;
To reset the 6120 to factory default. Power off the phone. Press and hold the green and yellow buttons. When the MAC address appears, release the yellow button. Password will appear release the green button. The default password is 123456. Press the arrow key in the middle of the phone. The reset option is at the bottom of the list.
- Status
Similar threads
- Locked
- Question
- Locked
- Question